YotaTech Forums
Share Your Pictures with Our Community. Upload Now
For a 2wd 99 4runner
For a 2wd 99 4runner
0 2026/04/25 22:02:57
Its on the other side
Its on the other side
0 2026/04/25 22:02:44
Terminal L9, be sure not to accidentally touch another any other point
Terminal L9, be sure not to accidentally touch another any other point
0 2026/04/25 22:02:30
Check Terminal L9
Check Terminal L9
0 2026/04/25 22:02:21
0 2026/04/25 20:07:01
0 2026/04/25 20:06:59
I was contacted with a request to make these gears. Pictured is my test part, and I will be making a batch of these, finishing in June. I will have them up for $189 at that time, but I’m offering a preorder price of $175 until then. There are two versions that I am aware of, one with a 8mm groove width and one with a 10mm. I have good news! I’m making brand new chromoly reverse idle gears. Below is the pre-order link. I should have a batch ready in June
I was contacted with a request to make these gears. Pictured is my test part, and I will be making a batch of these, finishing in June. I will have them up for $189 at that time, but I’m offering a preorder price of $175 until then. There are two versions that I am aware of, one with a 8mm groove width and one with a 10mm. I have good news! I’m making brand new chromoly reverse idle gears. Below is the pre-order link. I should have a batch ready in June
0 2026/04/25 19:45:37
0 2026/04/25 19:45:35
0 2026/04/25 11:48:01
0 2026/04/24 21:55:16
0 2026/04/24 21:55:12
0 2026/04/24 21:55:09
Advertisement
0 2026/04/24 21:55:04
0 2026/04/24 15:22:40
0 2026/04/23 12:18:50
0 2026/04/23 07:09:49
0 2026/04/23 07:09:41
0 2026/04/23 07:09:36
0 2026/04/22 16:33:21
0 2026/04/22 16:33:08
0 2026/04/22 16:33:03
0 2026/04/22 09:09:06
Before adding top foam.
Before adding top foam.
0 2026/04/22 09:09:00
0 2026/04/22 09:08:54
Before adding the thin grey vertical strips that seal the thin gaps of the radiator’s mounting flanges to the core support.
Before adding the thin grey vertical strips that seal the thin gaps of the radiator’s mounting flanges to the core support.
0 2026/04/22 09:08:50
0 2026/04/22 09:08:45
0 2026/04/22 09:08:42
0 2026/04/22 09:08:38
0 2026/04/22 09:08:34
0 2026/04/22 09:08:29
0 2026/04/22 08:57:34
0 2026/04/22 08:57:29
Advertisement