Hey, I found a posting board between you and supercheim. The Pink wire at E5 pin 8, is the etcs wire, which is the one that needs to be hooked up. I ran it up to the battery, turned it over and she started. But, also drove too, not just bogged down at 2000 rpm. Thanks so much!

make sure you have the ects wire hooked up to a 15 amp fused power source. However it will still start and run without this hooked up just not very well... First thing to do is pull a plug out and make sure you have spark. On my swap I needed to hook up the red/white wires to switched power coming from the engine harness... this powers all the components / things needed to make it run. Also make sure your cor is wired correctly.