ok so speedy j has been helping me out on my car and i had a question about the small vacum hoses that go onto the passenger side of the intake manifold. there are two black clusters with three prongs sticking out and i was wondering which hoses go to which prongs....the hoses are numbered 1-6 and if you have a picture to show that would be really helpfull thanks

 

ok i found a picture of what im talking about but i need to know th rest of the #s on the lines <a href="http://s82.photobucket.com/albums/j260/hellonweels89/?action=view&current=MiscBaselinePics008Medium.jpg " target="_blank"><img src="http://i82.photobucket.com/albums/j260/hellonweels89/MiscBaselinePics008Medium.jpg" border="0" alt="Photobucket - Video and Image Hosting"></a>

 

Look here, Post #9
https://www.yotatech.com/forums/show...t=Vacuum+hoses

 

I was just there - documentation is key -
ok you have #3 #5 #6
3 in the top 6 bottom right and 5 on the left.

ok there ya have it.

J

 

Sorry about that you wanted all the hoses ?
theres #* #1 and #2 as well as 3-6 except I believe 4 goes else ware in this grouping - you can see by the photo where #3 and #* are located.
#* goes to that splitter on the top, #2 under it on rightish and #1 below on left with the oneway valve attached to #1 -
bag picture attached .

you get the idea

 

My hoses are not #ed or cant be read anymore So my pictures are the direct aproach of whats connected to what.
This also aplies to those that have replace there or have moved them around to fit since ends split and need to be cut-off.
There is also many ways to connect to the 3 to 1 from the manifold, I just did a general idea.