Im going through Jason B for my Tjm 15, cornfed fronts and OME 891s now this guy from cornfed said that 2.5 inch front spacers would be too tall for 891s? I thought the 891s gave about 2 to 2.5 inchs of lift. Am I wrong or is he kinda off the wall with this?

What spacers Should I get?

 

891's should give you about 3" of lift. Do you need 5" in the back based on you wanting to put spacers on w/ taller coils? If so, just go w/ the LC coils that people are using for the OEM lift.

 

no the spacers are going in the front.

I knew he was off. he was telling me 1 to 1.5 inches of lift in the rear

 

Oh, got it. The 891's will give you at least 3". They're supposed to settle but others have posted that they don't settle much, if any.

 

Definalty stick with 2.5 up front. People have had CV problems with 3 inch spacers up front.

 

891s will give you 3-3.5"

 

He's waaaay off. I got 2.25" - 2.5" with my 890's alone.
The 891's will be just a hair over 3" when you install them.