ARP Toyota-Specific Wheel Studs
Apr 3, 2006 | 02:02 PM
#1
Thread Starter
Registered User
Joined: Feb 2004
Posts: 56
Likes: 0
From: Bend, Oregon
ARP Toyota-Specific Wheel Studs
ARP Part Number: WSAU.588-1
Application: Toyota / Lexus Front & Rear
Thread Diameter: 12mm x 1.5 thread pitch (stock)
Knurl Diameter: Factory
Overall Length: 2.625”
IMPORTANT: The knurl length is only a little over .310" and doesn't have the 15mm dia. register for press-on disc rotors, so these won't work for (front) straight-axles.
Application: Toyota / Lexus Front & Rear
Thread Diameter: 12mm x 1.5 thread pitch (stock)
Knurl Diameter: Factory
Overall Length: 2.625”
IMPORTANT: The knurl length is only a little over .310" and doesn't have the 15mm dia. register for press-on disc rotors, so these won't work for (front) straight-axles.
Dec 5, 2007 | 08:28 PM
#2
Registered User
Joined: Aug 2005
Posts: 1,731
Likes: 3
From: Philly PA
DANG
I shoulda searched.
I used ARP 100-7718 (listed as Celica GTS parts)
M12-1.5
Knurl Diameter - 0.565
Overall Lenght - 2.340
Knurl length - 0.325
Nose - 0.363
They work fine. I actually like the bullet nose...
They are not as long as the ones posted above
I shoulda searched.
I used ARP 100-7718 (listed as Celica GTS parts)
M12-1.5
Knurl Diameter - 0.565
Overall Lenght - 2.340
Knurl length - 0.325
Nose - 0.363
They work fine. I actually like the bullet nose...
They are not as long as the ones posted above
Last edited by ewong; Dec 5, 2007 at 08:33 PM.
Thread
Thread Starter
Forum
Replies
Last Post
kgcwb44
86-95 Trucks & 4Runners (Build-Up Section)
4
Jan 29, 2023 10:02 AM
Up&Down
95.5-2004 Tacomas & 96-2002 4Runners
8
Aug 5, 2015 06:20 AM
whereAreMyPants
86-95 Trucks & 4Runners
2
Jul 22, 2015 03:32 AM
