body parts, yum . . .
#1
Thread Starter
Registered User
Joined: Feb 2003
Posts: 6
Likes: 0
From: estes park, colorado - gateway to rocky mountain national park!!!
well, i've had my machine for just right at 1 week, and was taking a buddy home from a day of snowboarding - leaving his newly plowed driveway (in the woods) i drifted over a bit to the right (as one sometimes does in snow) and bam! what? a two foot high stump buried along the edge of the drive? my chrome valance is now modern art . . .
wondering if any of you have recommendations for where to find a replacement. sure, i'll check local salvage yards - there's also a guy on ebay selling new aftermarket parts, but his feedback makes him less than ideal. anyone out there got parts recommendations for a new kid on the block? sure, it's just a small thing, but i'm liking this truck more and more every day, and have only had it a week - so i'm aggravated that i've fubar'd the front . . . :pat: thanks for any help. the count
wondering if any of you have recommendations for where to find a replacement. sure, i'll check local salvage yards - there's also a guy on ebay selling new aftermarket parts, but his feedback makes him less than ideal. anyone out there got parts recommendations for a new kid on the block? sure, it's just a small thing, but i'm liking this truck more and more every day, and have only had it a week - so i'm aggravated that i've fubar'd the front . . . :pat: thanks for any help. the count
#2
If its a stock piece I can probably find one in a junkyard down here. If you can get a picture of it, it would help. I'm not picturing a chrome valenece on a 90 Runner.
Its late and my brain has been short circutiong all day.
Its late and my brain has been short circutiong all day.
#3
Thread Starter
Registered User
Joined: Feb 2003
Posts: 6
Likes: 0
From: estes park, colorado - gateway to rocky mountain national park!!!
thanks matt,
i'll shoot a photo in the next few days - meanwhile, will check the salvage yards close by . . . will let you know status. greg
i'll shoot a photo in the next few days - meanwhile, will check the salvage yards close by . . . will let you know status. greg
#4
Registered User
Joined: Oct 2002
Posts: 18
Likes: 0
From: Austin, Texas
An Aftermarket Steel Valance (Made in Taiwan) goes for less than $20 (I bought one). Be wary of the guy on Ebay. Also, these ROC parts tend to vary in fit and finish. Look in your local phonebook or on yp.yahoo.com for a collision parts store. Also check copartfinder.com or junkyarddog.com If you were in SoCal, finding the part would be a piece of cake.
Good Luck!
Good Luck!
Thread
Thread Starter
Forum
Replies
Last Post
GreatLakesGuy
The Classifieds GraveYard
8
Sep 4, 2015 09:27 AM
Avenged
95.5-2004 Tacomas & 96-2002 4Runners
4
Jul 9, 2015 07:55 AM
skoti89
Off Road Trip Planning, Expeditions, Trips, & Events
0
Jul 6, 2015 07:45 PM




