Weekend after next I'll be tearing into my truck to fix a rattle. I'm pretty sure it's the spindle bushings, so I'll be doing this mod: <https://www.yotatech.com/~corey/tech/jimrockford_spindle/jimrockford.htm>.

While I'm at it, I will also be replacing the inner CV boots, which are torn. The outer boots look to be in good shape. I'll grind the splines off the studs (if that hasn't already been done) and make it easier for next time.

And since I'm spending money on the truck, I decided to go ahead and put on a pair of Warn Premium Manual Hubs.

Is there anything else that I should look at while I've got everything torn up down there? I've already done the diff breather mod and idler arm bushing.