95.5-2004 Tacomas & 96-2002 4Runners 4th gen pickups and 3rd gen 4Runners

Newbie w/ Questions...

Thread Tools
 
Search this Thread
 
Old Jun 6, 2005 | 10:55 AM
  #1  
BrentNClemson's Avatar
Thread Starter
Registered User
 
Joined: Jun 2005
Posts: 9
Likes: 0
From: Clemson, SC and Marietta, GA
Newbie w/ Questions...

Wanted to say hey and ask a couple questions.

Just got my first foreign vehicle, a 94 4Runner w/ the V6 and 4x4. I'll be using it as a daily driver and retire my 91 XJ to trail duty. Just starting to get acquainted w/ all the new Toyota stuff and wanted to address a couple issues.

1. The engine runs real strong (especially for 145k) but stumbles at low rpm and slight throttle. I feel it the most when driving in a parking lot or pulling in/out of a spot. Where's a good place to start? Clean the throttle body, MAF?

2. At highway speeds a moderate vibration can be felt when I let off the gas. It does this from about 70-85 mph. I'm thinking a u-joint has gone bad, but haven't gotten under there to look yet.

Again, these have probably been asked before, but I'm just checking to see if they may be problems that a lot of people have...hopefully w/ easy solutions!

Brent N.
Reply
Old Jun 6, 2005 | 11:13 AM
  #2  
rimpainter.com's Avatar
Contributing Member
 
Joined: Jan 2003
Posts: 10,916
Likes: 1
Originally Posted by BrentNClemson
1. The engine runs real strong (especially for 145k) but stumbles at low rpm and slight throttle. I feel it the most when driving in a parking lot or pulling in/out of a spot. Where's a good place to start? Clean the throttle body, MAF?
Welcome to Toyota land Brent. Cleaning the TB would be a good idea no matter what. As for the MAFS, well, you don't have one. You have a VFM (or flapper). You can actually clean those too. In all honesty, it could be a number of things. It could be a improperly gapped plug, a bad plug wire, etc. I would start going down the list and testing some of those items (cheapest first of course) and see if you can eliminate the problem.

Best of luck and be sure to let us know if you have any other questions.
Reply
Old Jun 6, 2005 | 11:30 AM
  #3  
BrentNClemson's Avatar
Thread Starter
Registered User
 
Joined: Jun 2005
Posts: 9
Likes: 0
From: Clemson, SC and Marietta, GA
Hey thanks! I'll go through the ignition system and see if everything looks okay first. I forgot how long it takes to learn all these things about a new vehicle...guess I better get started!
Reply
Old Jun 6, 2005 | 11:32 AM
  #4  
rimpainter.com's Avatar
Contributing Member
 
Joined: Jan 2003
Posts: 10,916
Likes: 1
A multi-meter and FSM would be a great idea for troubleshooting the hesitation...if you can swing it.
Reply
Old Jun 6, 2005 | 12:19 PM
  #5  
Flamedx4's Avatar
Registered User
 
Joined: May 2004
Posts: 3,291
Likes: 0
From: 100 miles offshore as much as possible, & Springfield Oregon USA
#1 - More throttle - just put it to the floor, problem solved!
#2 - See #1
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Jin_Chris
95.5-2004 Tacomas & 96-2002 4Runners
6
Sep 14, 2008 04:27 PM
aaronk
Newbie Tech Section
10
Sep 12, 2007 07:24 AM
mwarner
95.5-2004 Tacomas & 96-2002 4Runners
6
Dec 2, 2004 04:58 PM




All times are GMT -8. The time now is 09:40 AM.