Hello all, new to site. I recently purchased a 94 4x4 pickup and immeditely dropped the transmission to do a clutch job. I'm planning a lot of mods at the same time. Slotted rotors, header, exhaust, lift, 5.29's, etc. I'm curious about tire size. Can I run a 37x12 on a 16x8 wheel with a 5 inch rough country lift? I already have the lift and want to order the tires.

 

Your mod is pretty extensive, one that exceeds my personal experience. If you don't get much feedback here the Marlin Crawler Forum may have members who could offer some insight

 

They should fit fine. You may need to trim the pinch weld, but theyll fit.

May be worth looking into a 17" rim, as there are a lot more tire options for that rim size.

 

Thanks for your responses. now if I can figure how how to upload pictures, I will.

 

Photo bucket is not good these days. Best to use something else to upload such as Imgur or supermotors

But read through this:

https://www.yotatech.com/forums/f120...-guide-237689/