Guy coming to pu a 95 3.0 2wd runner from me i have been parting. Got 0 brakes on my 88 22ret runner. I thought i had read these rotors will bokt onto 1st gens. These rotors are in spec and new pads when the gasket blew. I was going to get booster, master, calipers, lines and stuff from the front. Will it work?

 

I put rotors and calipers from a '92 3vz 4runner on my '87 22re 4runner.

Just had to trim the backing tin to clear the new calipers

Changed out the hubs whole, in fact, because the wheel bearings were near new on the '92

 

2wd or do only 4wd ones work. I will keep the calipers booster and everything but guy is coming tp traiker this thing to mississippi so if the rotors wont benefit me i can let them make the ride. On the 2wd rotors everything comes off leaving only the spindle.

 

My stuff was 4x4 to 4x4. I can't say about 2wd.

 

Dont they have to have the big hole for the locking hub to come through. The 2wd only have the spindle coming thru the wheel bearing. I am thinking its a no go but maybe the dual pistion calipers and boostrr/master combo with work with other 4wd rotors.