http://www.lcengineering.com/LCInstr...stallation.pdf

On the curved guide, the top hole is slotted. Lce says to 'keep loose' until chain and top sprocket is installed. The pic says to slide the guide to passenger side, and tighten down to 9 ft. lbs. BUT!! When reading the actual instructions, they say to slide the guide (towards drivers side) so it retracts the tensioner as much as possible. So which is it? Outboard position, or inboard?
I see if I move the guide all the way inboard I think the slot will be longer than what the tensioner will allow.. so my guess will be somewhere in the middle of slot.