Notices
86-95 Trucks & 4Runners 2nd/3rd gen pickups, and 1st/2nd gen 4Runners with IFS

91 toyota 4x4 pick up wire problems

Thread Tools
 
Search this Thread
 
Old Mar 19, 2017 | 05:06 AM
  #1  
Franka's Avatar
Thread Starter
Registered User
 
Joined: Mar 2017
Posts: 3
Likes: 0
91 toyota 4x4 pick up wire problems

The truck has the 22r-e motor iv searched an searched for wiring diagrams on the wire harness go in to ignition switch its the 8 pin plug could someone tell me what color wire goes to what I know the black wire is starter

Reply
Old Mar 19, 2017 | 06:50 AM
  #2  
rustypigeon's Avatar
Registered User
 
Joined: Jul 2006
Posts: 617
Likes: 4
From: PA USA
Not sure if it helps, but this is the wiring for a '94. It is probably is similar, though it looks like you have a couple of extra wires. They both have 8 pin connectors, but it looks like some of your wires are in different positions, it is hard to tell because your fingers are blocking which wires are going to which pins.

'94 wiring...
Pin 1- black/yellow- Goes to the following fuses: gauge, wiper, turn, ecm-ig, engine
Pin 2- blue/red- Goes to the following fuses: radio, cig
Pin 3- white- input from AM1 40amp fuse
Pin 4- unknown, not shown on my diagram
Pin 5- unknown, not shown on my diagram
Pin 6- black- goes to starter relay pin 1, signal input
Pin 7- black/red- ign fuse, injectors, ignitor
Pin 8- white/red- input from AM2 30amp fuse

Here is a power flow diagram on page BE-7 that will help you visualize it...
http://htftp.offroadsz.com/marinhake.../2powersou.pdf
Reply
Old Mar 19, 2017 | 05:10 PM
  #3  
atcfixer's Avatar
Registered User
5 Year Member
iTrader: (1)
 
Joined: Sep 2016
Posts: 806
Likes: 41
From: Mid Michigan
Do you need an ignition or something? Hot wiring it seems to be a lot of a pain to go though.
Reply



All times are GMT -8. The time now is 09:41 PM.