Notices
86-95 Trucks & 4Runners 2nd/3rd gen pickups, and 1st/2nd gen 4Runners with IFS

finishing up a head gasket job and I have no idea where this bracket belongs

Thread Tools
 
Search this Thread
 
Old Mar 5, 2017 | 03:48 PM
  #1  
oscaroc's Avatar
Thread Starter
Registered User
 
Joined: Mar 2017
Posts: 1
Likes: 0
finishing up a head gasket job and I have no idea where this bracket belongs

i acquired a 94 toyota 4wd 3.0 liter pickup last fall on the cheap due to a bad head gasket and other issues. I started pulling it all apart soon after, well I got pulled away from this project with my job and life. Now that I have time to put back together. I've reached a point where I'm putting the timing belt and accssory brackets back on and I ha e no idea where this bad boy goes. Any help would be greatly appreciated🤓

Im new here btw, and this is 1 of 2 project trucks I've acquired so I'll probably be around a bit, lol!
Attached Thumbnails finishing up a head gasket job and I have no idea where this bracket belongs-img_2106.jpg  
Reply
Old Mar 16, 2017 | 06:32 PM
  #2  
mitch88RN63's Avatar
Registered User
 
Joined: Nov 2016
Posts: 58
Likes: 0
From: Central California
Looks like the adjusting bolt for the power steering pump
Reply



All times are GMT -8. The time now is 08:33 PM.