99 4runner clutch fan
Jul 26, 2013 | 07:41 PM
#3
Contributing Member
Joined: Nov 2010
Posts: 5,125
Likes: 4
From: Columbia River Gorge, Oregon...east side
Don't know of a video other than this
, but it's simply loosen the belt, remove fan shroud (may not need to if enough clearance), and remove the 4 nuts holding the fan clutch to the fan pulley. A long box end wrench works for me on those 12mm nuts.
I generally drain a bit of coolant and remove one end of the upper radiator hose so the fan is easy to lift out. Once it's out, the fan is attached to the clutch with 4 nuts.
The first page of this tutorial may help.
I generally drain a bit of coolant and remove one end of the upper radiator hose so the fan is easy to lift out. Once it's out, the fan is attached to the clutch with 4 nuts.
The first page of this tutorial may help.
Last edited by rworegon; Jul 26, 2013 at 08:08 PM.
Jul 26, 2013 | 09:36 PM
#4
Registered User
Joined: Feb 2007
Posts: 1,262
Likes: 4
From: New Jersey and Sao Paulo
No vid, but here is my mini-DIY:
https://www.yotatech.com/forums/f2/1...l#post51509656
Other good stuff elsewhere in thread.
Pretty easy job.
https://www.yotatech.com/forums/f2/1...l#post51509656
Other good stuff elsewhere in thread.
Pretty easy job.
Thread
Thread Starter
Forum
Replies
Last Post
FS[SouthEast]: Mercury Villager Fan & DCC Fan Controller
coryc85
Misc Stuff (Vehicle Related)
6
Sep 9, 2015 06:24 AM
GreatLakesGuy
The Classifieds GraveYard
8
Sep 4, 2015 09:27 AM
