help. point me to a SF bay area shop that has tuned a 7th injector
Sep 21, 2010 | 09:30 PM
#1
Thread Starter
Registered User
iTrader: (1)
Joined: Sep 2008
Posts: 41
Likes: 0
From: Bay Area, California
help. point me to a SF bay area shop that has tuned a 7th injector
Hello,
I am looking for a shop in the SF bay area for an installation and tuning of a URD 7th injector.
the last shop i used, had never dune it and ended up refunding my money and returning the URD unit with the maps deleted.
The entire unit was pulled out i will call gadget to see if he can fit the unit before i re-intal the software and clean up the bad wire cut job.
I hope to find a Shop or have some one recommend a shop that has experiance doing the full installation and tuning of the URD 7th injector, in the SF bay area of course.
AC
I am looking for a shop in the SF bay area for an installation and tuning of a URD 7th injector.
the last shop i used, had never dune it and ended up refunding my money and returning the URD unit with the maps deleted.
The entire unit was pulled out i will call gadget to see if he can fit the unit before i re-intal the software and clean up the bad wire cut job.
I hope to find a Shop or have some one recommend a shop that has experiance doing the full installation and tuning of the URD 7th injector, in the SF bay area of course.
AC
Last edited by Aznwolf118; Sep 21, 2010 at 09:38 PM.
Sep 21, 2010 | 10:11 PM
#3
The install is not hard at all. I have not tuned mine yet and am running the default tune. I still have to swap the stock fp with the walbro 190 pump. The kit comes with the needed software. All you need is a laptop and time. Any real tuning shop should be able to tune it with the software from urd. Its not much any different than just tuning any other forced induction set up.
Thread
Thread Starter
Forum
Replies
Last Post
WTB[PacNorWest]: WTB - Tacoma/4runner 3.4 Charcoal canister and igniter
94whiterunner
Items Wanted
0
Jul 12, 2015 07:15 PM
