So I took apart my throttle body yet again and am currently setting the tps for the final time. I've made sure my throttle stop screw is correctly set and this is a brand new sensor, on the first test (0mm VTA-E2) it reads .96ohms and the same measurement @ .50mm reads 1.03 ohms. The Third test (.85mm IDL-E2) is at infinity, and the second test (.77mm VTA-E2) reads 1.02. open throttle reads 3.5k. So my question is... Are these values within and ok operating spectrum, or is something still off? Any and all help is greatly appreciated.