I changed out a wheel cylinder today and was looking over my rear springs. I am still trying to ID my lift. The front seem to be TG 3 inch springs. The rears seem to be from a differnt manufacture. The original frame mount had been cut and pushed towards the front of the frame a little more.

Stenciled on the springs are "Toyrear37"


There is what looks to be an overload spring on top and it only goes from the ubolt plate to the spring eye that mounts to the frame.


And the spring has an extra leaf that goes all the way to the eye but no so much a military wrap but halfway and it seems to brace the spring. And there are many leaves in the pack.


Anyone else have a set of springs like this?

Thanks

 

Google is your friend......

All-Pro Rear 5" spring

http://www.pirate4x4.com/forum/showthread.php?t=233652

 

Thanks. Now I have the lift pinned down. KStill odd they have 5 inch in the rear with extended shackles and lift blocks, but the front was regular 3 inch springs. And the rear is not jacked up as much as you would think.