BFG AT LT265/65/R18 rubbing UCAs - advice requested
Aug 15, 2009 | 07:18 PM
#1
Thread Starter
Registered User
Joined: Dec 2007
Posts: 15
Likes: 0
BFG AT LT265/65/R18 rubbing UCAs - advice requested
Hey all, I recently installed BFG AT's in LT265/65/R18. The stock size on my '07 LTD 4WD V8 is P265/60/R18.
I've got an OME lift and these BFGs are rubbing the UCAs!! I never expected this with such a conservative tire swap.
It looks like the UCA does not rub at all when the 4Runner is stopped, so I cannot exactly see what is going on. Most likely, there's a little rub at speed when the suspension moves up & down.
How serious is this? I have to go on a roadtrip Tuesday AM, so I will not have time to get Spidertrax Spacers FedExed.
Any Ideas? Many thanks for all replies.
I've got an OME lift and these BFGs are rubbing the UCAs!! I never expected this with such a conservative tire swap.
It looks like the UCA does not rub at all when the 4Runner is stopped, so I cannot exactly see what is going on. Most likely, there's a little rub at speed when the suspension moves up & down.
How serious is this? I have to go on a roadtrip Tuesday AM, so I will not have time to get Spidertrax Spacers FedExed.
Any Ideas? Many thanks for all replies.
Last edited by Carl44; Aug 15, 2009 at 07:40 PM.
Thread
Thread Starter
Forum
Replies
Last Post
FS[GreatLakes]: 33x12.5x15 bfg ko a\t
muddpigg
Axles - Suspensions - Tires - Wheels
8
Nov 2, 2015 05:36 AM
94toyy
95.5-2004 Tacomas & 96-2002 4Runners (Build-Up Section)
12
Sep 14, 2015 06:18 AM
FS[SouthEast]: Brand new 26 mm. Downey torsion bars
HiLuxer
Axles - Suspensions - Tires - Wheels
2
Sep 9, 2015 02:43 PM
