I have a 1999 4runner that I would like to lift about 2". Ive heard anymore than that and you start screwing things up. Been looking at Old Man Emu 881 coils which add 1.75-2" and the 906's which also add 2" but i have also seen that the 1999 coils are 1" or so taller than the other 3rd gen 4runners so what should i do? Also if anyone knows any other coil companies i could check out. Thanks

 

If you go any higher then 2" your cv angles will be lame and you will rip boots and break shafts..

the ome 881's for the front wont be a bad setup at all, I just ordered a set (and shocks) from TRDparts4u (forum sponsor) for a great price..

Im not to sure about the rear though as I have a taco..

 

not all 99s came equipped with the tall coils. Mine for example did not.

Read up on Sonoran Steel website-FAQ section for the 96-02 Runner lifts.

A body lift of 2" may accomplish what you want as well. 4crawler.com is a certified expert of body lifts.