allright, i've searched and searched with no conclusive answer.



Can I install these TRD Bilstein off-road Tacoma shocks on the front of my '99 4runner?

Also, with the proper springs (thinking OME 890s), will these rear shocks from an '05 TRD Bilstein off-road Tacoma work? Will everything be even with the front tacoma springs and the rear OMEs?




I want the combination of Tundra TRDs and OME 890s for my lift and new shocks as well. I am simply researching other less expensive options. I want my 4runner to look like Gerdo's:


thanks for your input.

 

At least guess by looking at the pics if the design of the suspension looks like it might work...or post a witty insult. whichever strikes you.

 

front shocks and spring nope will not work, rear shocks should work

 

you could use the top spring perches from the 99 ontop of the 05 strut to match up the stud holes....maybe. i also have been thinking of this type of mod.

 

has anyone actually tried this...?

 

i have 2010 taco springs on the front of my 98 limited.I used the 4runners shock and top plate.It had ome shocks on it when I got it. Works great and about 1.5 inch of lift,and a little smoother ride then the ome springs that were on it. The taco front shocks are too long. Not sure about rear shocks but worth checking into.