95.5-2004 Tacomas & 96-2002 4Runners 4th gen pickups and 3rd gen 4Runners

Post your interior's. I want to see some setups. **PICS**

Thread Tools
 
Search this Thread
 
Old Mar 6, 2009 | 06:02 PM
  #1  
Paul's Avatar
Thread Starter
Registered User
 
Joined: Feb 2003
Posts: 131
Likes: 0
From: GA
Post your interior's. I want to see some setups. **PICS**

I have been neglecting my 4runner since I bought an 06 Altima and for summer wanted to do some remodeling of the interior. Here are some of my pics. Lets see what everyones interior looks like?




Reply
Old Mar 6, 2009 | 08:29 PM
  #2  
MillerPKA's Avatar
Contributing Member
 
Joined: Nov 2006
Posts: 1,434
Likes: 0
From: GSU/ATL/SD
Looks good man, someone local. I'm heading up to Atlanta to meet a buddy tomorrow and get new rims. I'll be up in Roswell in the afternoon I'll keep an eye out for ya

forgot about interior, i wanted to keep mine as factory as possible, little bass in the rear and that's it


Last edited by MillerPKA; Mar 6, 2009 at 08:33 PM.
Reply
Old Mar 6, 2009 | 09:09 PM
  #3  
toylocost's Avatar
Registered User
 
Joined: Jul 2007
Posts: 1,705
Likes: 12
From: Yotatech, because Pirate is too expensive. NorCal.
https://www.yotatech.com/forums/f2/a...runner-166724/
Reply
Old Mar 6, 2009 | 09:31 PM
  #4  
98.T4R's Avatar
Registered User
 
Joined: Feb 2009
Posts: 120
Likes: 0
From: colorado
Reply
Old Mar 6, 2009 | 09:32 PM
  #5  
98.T4R's Avatar
Registered User
 
Joined: Feb 2009
Posts: 120
Likes: 0
From: colorado
Reply
Old Mar 7, 2009 | 11:10 AM
  #6  
Rock Slide's Avatar
Contributing Member
iTrader: (1)
 
Joined: May 2006
Posts: 2,262
Likes: 1
From: B'ham, AL
All stock here


Reply
Old Mar 7, 2009 | 07:36 PM
  #7  
Nuthuts96's Avatar
Registered User
iTrader: (1)
 
Joined: Feb 2007
Posts: 419
Likes: 0
From: Shelburne, VT previous: Everett, WA; Bellingham, WA
Originally Posted by Rock Slide
All stock here


all that silver is stock? around the shifter/dash bezel, etc...? never seen that before (though i'm not that informed when it comes to the newer of the 3rd gens' interiors)
Reply
Old Mar 8, 2009 | 07:38 AM
  #8  
LifeOnABoard's Avatar
Registered User
 
Joined: Feb 2009
Posts: 134
Likes: 0
From: Maine
Originally Posted by Rock Slide
All stock here


Hey, where do I get those floor mats?
Reply
Old Mar 8, 2009 | 10:00 AM
  #9  
stagger_lee's Avatar
Registered User
 
Joined: Sep 2008
Posts: 839
Likes: 1
From: So Cal
Originally Posted by 98.T4R
What do all these switches do? Nice clean install.
Reply
Old Mar 8, 2009 | 10:40 AM
  #10  
toyospearo's Avatar
Registered User
15 Year Member
 
Joined: May 2008
Posts: 3,277
Likes: 23
From: way way nor cal
Heres my dirty 94 interior after a long day in the backwoods dodging pot grower bullets




Last edited by toyospearo; Mar 8, 2009 at 10:44 AM.
Reply
Old Mar 8, 2009 | 02:14 PM
  #11  
Rock Slide's Avatar
Contributing Member
iTrader: (1)
 
Joined: May 2006
Posts: 2,262
Likes: 1
From: B'ham, AL
Originally Posted by Nuthuts96
all that silver is stock? around the shifter/dash bezel, etc...? never seen that before (though i'm not that informed when it comes to the newer of the 3rd gens' interiors)
Sure is! It's part of the Sport Edition Package.


Originally Posted by LifeOnABoard
Hey, where do I get those floor mats?
They're WeatherTech Liners. Love 'em BTW.

Check out my review here: https://www.yotatech.com/forums/f2/d...r-mats-156950/
Reply
Old Mar 8, 2009 | 02:49 PM
  #12  
98.T4R's Avatar
Registered User
 
Joined: Feb 2009
Posts: 120
Likes: 0
From: colorado
thanks. well from left to right switch#1 fog light mod, #2 left side rock lights, #3 right side rock lights and switch 4 is the remote wire for my amp
Reply
Old Mar 8, 2009 | 05:44 PM
  #13  
pattycakes77's Avatar
Registered User
iTrader: (2)
 
Joined: Mar 2006
Posts: 1,323
Likes: 4
From: Iowa


https://www.yotatech.com/forums/f2/f...gauges-130993/
Reply
Old Mar 8, 2009 | 06:01 PM
  #14  
98.T4R's Avatar
Registered User
 
Joined: Feb 2009
Posts: 120
Likes: 0
From: colorado
nice install pattycakes i have been wanting to do a gauge setup like that. what did you use to get your heater controles so green? or am i just seeing stuff??
Reply
Old Mar 8, 2009 | 06:47 PM
  #15  
claudebadly's Avatar
Registered User
 
Joined: Sep 2008
Posts: 76
Likes: 1
Originally Posted by toyospearo
Heres my dirty 94 interior after a long day in the backwoods dodging pot grower bullets



whats with all the stuff on the A pillar?
Reply
Old Mar 8, 2009 | 06:58 PM
  #16  
toyospearo's Avatar
Registered User
15 Year Member
 
Joined: May 2008
Posts: 3,277
Likes: 23
From: way way nor cal
It is a Ram Mount for a Garmin GPS IV. It works perfectly up there. I don't have to look down or over and strain my eyes. The info on those things is small and that mount is close enough to see. In that picture it looks like it obstructs my view but it really doesn't. It is more off to the left and out of the way. That is kind of a bad picture.

Last edited by toyospearo; Mar 8, 2009 at 07:00 PM.
Reply
Old Mar 8, 2009 | 07:26 PM
  #17  
claudebadly's Avatar
Registered User
 
Joined: Sep 2008
Posts: 76
Likes: 1
right on. looks sweet lol
Reply
Old Mar 8, 2009 | 08:49 PM
  #18  
move120's Avatar
Registered User
 
Joined: Dec 2008
Posts: 13
Likes: 0
From: NOVA (Northern Virginia)






Reply
Old Mar 9, 2009 | 06:14 PM
  #19  
pattycakes77's Avatar
Registered User
iTrader: (2)
 
Joined: Mar 2006
Posts: 1,323
Likes: 4
From: Iowa
Originally Posted by 98.T4R
nice install pattycakes i have been wanting to do a gauge setup like that. what did you use to get your heater controles so green? or am i just seeing stuff??
LEDs of course! they produce more of a "true" color than the bulb covers.
Reply
Old Mar 10, 2009 | 12:59 PM
  #20  
Ritzy4Runner's Avatar
Registered User
15 Year Member
Liked
iTrader: (1)
 
Joined: May 2006
Posts: 979
Likes: 13
From: Shelton, WA
Don't have pics yet but started doing my DVD muti-media install on my 98. going to go to the local bone yard to get another roof support to add to the one already there. should be simple, already removed the freakin interior getting the head liner out!

Will have pics later when I do my write up. Wanting to do a few more things to mine, adding more interior lighting, outlets etc. Looking where to install the hookups for the DVD multimedia plug ins at. Can't really use the idea of the center cosole as I have a rear heater so that area is a bit cramped but I will consider it. Was thinking maybe in the door pillar for the rear seat drivers side. Very nice looking interiors
Reply



All times are GMT -8. The time now is 06:48 PM.