Does anyone know of a good paintless dent repair outfit in the Seattle area? I have some hail damage on the roof of my Runner.

Looking for a place that can pull the dent without drilling. Unfortunately the dent is on the roof with no access to the sheet metal to push from behind.

Thanks

UB

 

Use Dent Wizard. They are the ones that created PDR. On top of that I used to sublet work out to them. Top notch professionals that get the job done. They are used by TMCC on all of their fleet and lease returns.

Dent Wizard

 

Uber,

Is it a bulging, concave dent? Or is it a sharp, pointed dent? If its the former, try pushing it out yourself.

Check out my write up on sound deadening and it'll show you how to remove your headliner. http://www.4runners.org/articles/sound


Bob

 

The dent is sharp, indented and pretty small (about the size of a dime). I call it a hail dent, but may have been caused be a rock or something dropped by a bird. It is on the rea or the roof near the rear hatch.

I appreciate the two suggestions. I would rather not remove the headliner, or have a PDR person remove anything either. It seems to be a perfect cadidate for a pulling device like the glue on pullers that get advertised.

I'll call dent wizard and see how they would deal with it and how much it would cost.