The 93 T100 was bought with a bad valve on one cylinder and a cracked head on the other side(160psi). Someone had put the headgaskets on the wrong side and caused some over heating which was fixed by taking out the thermostat. I took it apart intending to fix, but I decided to go for a 3.4 instead.

I have every part that goes on the engine, and every sensor. Brand new plug wires in duralast box for $30shipped.

The short block has 195,000 on it and I consider it more of a parts cashe. I did check the big end thrust and it was well below maxspec. The bottom end is tight and cross hatching can be seen. The problem is one of the coolent passageways was plugged up. I think anyone should take the whole thing apart and have the whole thing checked and clean the block.

I'll take any decent offer on any of this stuff. Paypal only shipped from 66046

I can take any pics. PM for phone.

Thanks
edit: added requested dizzy pics

 

I would like to get rid of the stuff other then throwing it away. I'll send the post back up. I would accept the cost of shipping for some stuff if anyone wants spares.

 

back to the top.

 

did this truck have a oil gauge or light? if it had the gauge, how much for the oil pressure sending unit shipped to 92394?

 

It doesn't have the gauge, but I'm doing a 3.4 swap so I'm going to keep that sending unit either way.

 

Do you still have the distributor? Can you please post a picture of it? How much shipped to 07940?

Thanks!!

 

I do have the dizzy. I'll get a pic.

 

pic added

 

Back up I added brand new plug wires for $30 shipped

 

I know a guy down in Springfield missouri who needs a 3zve block, how much you want for it?

 

Does he want to rotating assembly too? I would take what ever scrap is if you wanted to pick it up. Alittle more for me to meet him someplace in between. I haven't looked into how much steel is recycled right now. If he is interested and wants a more firm price. Let me know. Its about 3.5 hours away. fyi

 

If you want to PM me your phone number I'll forward it to him and have him contact you.

thanks

 

I sent a pm. Back to the top