I have a 4" suspension lift and 33x12.50's and an Aussie Locker in the rear.

I took is to Moab and it performed beyond my expectations but I wanted more.

So,

I bought a knuckle rebuild kit, 4.88 gears with master install kits, Aussie Locker for the front, Twin Stick, new clutch and a header.

Any tricks to installing the above?

I'm thinking of going to 35's and 3/4" wheel spacers next. I don't want any more lift if I don't have to.

Does anyone know if 35's with the wheel spacers will fit with no more lift or cutting the fenders?

Maybe I should just go with a 1" body lift or small shackle lift to get my clearance.

Any comments are appreciated.

 

My truck clears 35x13.5's on 15x8 rims with no spacers and a 4" lift, no fender/wheel well mods. They do rub at full stuff if im turning and they rub on the leafs at full lock. Id say stick to 33's for now unless you need new tires or just reallly want 35's.

 

Try the 35's if they rub buy longer shackles.

 

Run more backspacing instead of spacers.