Custom dual t-case x-member(4 cyl cases)for 3.4 5-speed out of 97 4Runner
Feb 18, 2008 | 06:43 PM
#1
Custom dual t-case x-member(4 cyl cases)for 3.4 5-speed out of 97 4Runner
Selling a custom built dual transfer case crossmember, this was out of a 1997 3.4 5-speed 4Runner,, this would be used for a SAS'ed vehicle running Toyota 4 cyl gear driven transfer cases with passenger side drop,
the crossmember has a 4 cyl t-case mount welded in place and has a tranny mount attached,
it will bolt up directly to the factory mounts on the frame,
should fit 96 thru 98 4Runners,, and possibly other years/models
$50.00
the crossmember has a 4 cyl t-case mount welded in place and has a tranny mount attached,
it will bolt up directly to the factory mounts on the frame,
should fit 96 thru 98 4Runners,, and possibly other years/models
$50.00
Thread
Thread Starter
Forum
Replies
Last Post
FS[PacSouthWest]: 2- 8"3rd members:4.88 ratchet lockers,new setup kit, rear axle rebuild kit,diff armor
jerusry
Axles - Suspensions - Tires - Wheels
1
Oct 19, 2015 05:28 PM
icentropy
86-95 Trucks & 4Runners
4
Jul 9, 2015 02:12 PM
toyoda8488
84-85 Trucks & 4Runners (Build-Up Section)
2
Jul 5, 2015 10:18 PM
