Largest deckplate for a 3.4L?
Feb 12, 2008 | 07:19 PM
#1
Thread Starter
Registered User
Joined: Jul 2007
Posts: 144
Likes: 1
From: Colorado
Largest deckplate for a 3.4L?
Well I'm sick and tired of having to 'warranty' new filters from AEM b/c I keep getting them all muddy. I'm going to put the stock intake back on and do the deckplate and ISR mods.
It seems like everyone uses a 4'' deckplate but I seem to recall that people have successfully used 6'' deckplates... What's the biggest that you can comfortablly fit?
Then there is the question of Air filters... I'm assuming that the OEM is the way to go? I know that K&N / amsoils can make a mess if you over-oil them...
It seems like everyone uses a 4'' deckplate but I seem to recall that people have successfully used 6'' deckplates... What's the biggest that you can comfortablly fit?
Then there is the question of Air filters... I'm assuming that the OEM is the way to go? I know that K&N / amsoils can make a mess if you over-oil them...
Last edited by LuminoZ; Feb 12, 2008 at 07:35 PM.
Feb 13, 2008 | 03:38 AM
#3
Contributing Member
Joined: Nov 2002
Posts: 10,666
Likes: 5
From: Oklahoma State
Anything bigger than the stock intake size is plenty. There won't be any gains by going bigger.
I like the OEM filter, it flows good enough to make 10 psi of boost (with no deck plate mod BTW).
I like the OEM filter, it flows good enough to make 10 psi of boost (with no deck plate mod BTW).
Last edited by mt_goat; Feb 13, 2008 at 06:26 AM.
Thread
Thread Starter
Forum
Replies
Last Post
nvwiggins
86-95 Trucks & 4Runners (Build-Up Section)
13
Jun 16, 2016 03:05 PM
LCE_Performance
95.5-2004 Tacomas & 96-2002 4Runners (Build-Up Section)
0
Oct 1, 2015 01:03 PM
PureTacoma_Tundra
PureTacoma_Tundra
0
Sep 24, 2015 12:14 PM
