Okay, so I got these lights from my brother, basically for free. They were on his truck that he wrecked, and he gave them to me for pretty much nothing.

The only problem is that they are old, and I mean old.

So here's what I know so far:

1 They are PIAA's.

2 They use H4 bulbs, they still have the original H4 PIAA bulbs that look all purpley and crap, so they have high/low beams

3 They are fricken HUGE (like 7.5 inches in diameter and 5.5 inches deep)


What they came with:

1 The whole wiring harness, two switches (one two way, and one three way), a relay/fuse box (two of each) and three cut mystery wires


What I don't know:

1 How the switches are supposed to work.

2 How rediculous these things are going to look on the front bumper of my basically stock truck

3 what the three mystery wires go to


Mystery wires:

One (black w/white line) comes out of the top(?) of the three way switch

One (black w/gray line) is linked to the bottom(?) of the three way switch

One (black) goes into the relay box and to each of the two relays


So I guess my questions are:

Any help on the wiring?

Should I keep/sell/trash these?

What model are they and should I just give PIAA a call, and maybe they'll have a wiring diagramor something, anything?

Off the top of my head, I would think that the two way switch is on/off, and the three way is low/high/low&high?

Thanks for any help, free crap can suck sometimes, Yota tech

 

pics?

it wouldn't be hard to make a relay harness for them using a 3-way switch and a couple of relays

 

sorry, forgot to load the pics the first time,

I was thinking that too, but if I can figure it out with out doing that, it would be cool, as all the connectors and everything are still there, along with some fatty ground and power cables

 

do you have the plugs/wires that go to the relay box?

 

yep, I've got everything, I've got all the wires from the switches to the relay box, to the lights (some are cut, but it's incredibly obvious where they go)

 

is there anybody out there?