sourcing diff drain/filler plugs for BJ42 1983 - not 24mm, not imperial??
Feb 24, 2007 | 05:33 PM
#1
Thread Starter
Registered User
Joined: Jan 2007
Posts: 4
Likes: 0
From: BNE AU
sourcing diff drain/filler plugs for BJ42 1983 - not 24mm, not imperial??
I am finding that the diff drain bolts and filler plug bolts are not really exactly 24mm - that size fits but tends to roll over - the 7/8 does not fit at all.
I have also heard that these plug bolts are tapered and do not require washers which may be why they have ended up super tight and one of them totally unremovable - going to have to plug weld it I think since I have mangled the filler plug for the rear.
Super Cheap don't seem to know what the story is.
Can anyone positively id these drain and filler bolts for me?
I would like to source new ones for both diffs if they are available...
Will
I have also heard that these plug bolts are tapered and do not require washers which may be why they have ended up super tight and one of them totally unremovable - going to have to plug weld it I think since I have mangled the filler plug for the rear.
Super Cheap don't seem to know what the story is.
Can anyone positively id these drain and filler bolts for me?
I would like to source new ones for both diffs if they are available...
Will
Thread
Thread Starter
Forum
Replies
Last Post
FS[PacSouthWest]: 2- 8"3rd members:4.88 ratchet lockers,new setup kit, rear axle rebuild kit,diff armor
jerusry
Axles - Suspensions - Tires - Wheels
1
Oct 19, 2015 05:28 PM
FS[GreatLakes]: Wanted: 4.88 front diff, rear 8'' 4.88
jaretstuff
Axles - Suspensions - Tires - Wheels
1
Aug 4, 2015 02:08 PM
Steven.m.paulk
86-95 Trucks & 4Runners (Build-Up Section)
3
Jul 24, 2015 01:44 PM
scottyg486
Offroad Tech
3
Jul 19, 2015 05:34 PM
