buildin a rear bumper for my runner!
Jan 24, 2010 | 01:26 AM
#1
Thread Starter
Registered User
Joined: Dec 2009
Posts: 646
Likes: 0
From: slc utah
buildin a rear bumper for my runner!
lets start with that i cant belive the stock bumper bolts to the body 
any ways i figured tube wpuld be easyest but i dont think tube rear would look to great withe the whole cab vent and all. so im going with plate kinda like an arb.. any ways this is were im at 
any ways i figured tube wpuld be easyest but i dont think tube rear would look to great withe the whole cab vent and all. so im going with plate kinda like an arb.. any ways this is were im at
Jan 27, 2010 | 06:30 AM
#6
Contributing Member
Joined: Apr 2004
Posts: 7,122
Likes: 6
From: 5th Gen San Diegan, California
Please take some pictures of the frame mounts, and as much information as possible. I am planning on building one here soon myself and would like as much eye candy I can get.
Did you delete your thread on the front bumper in the Tech section? I can't seem to find it anymore.
Did you delete your thread on the front bumper in the Tech section? I can't seem to find it anymore.
Mar 4, 2010 | 01:38 PM
#7
Thread Starter
Registered User
Joined: Dec 2009
Posts: 646
Likes: 0
From: slc utah
what i did was took some rectangular tubing that fit in the frame, i had to notch it to slide past 2 nuts welded in the frame. origonaly i was just gonna make it bolt on so i torched 4 holes in the frame, one on each side of the frame rail. well i decited to weld it on and thats were i sitr. its still not finished. 
Thread
Thread Starter
Forum
Replies
Last Post
stagger_lee
95.5-2004 Tacomas & 96-2002 4Runners (Build-Up Section)
6
Mar 29, 2016 06:27 PM
dirtrider0129
Buying & Selling Advice - Feeler/Gauging Interest
10
Jun 24, 2015 12:24 PM
