Offroad Power Products Land Cruiser 200 Series
Jun 12, 2013 | 10:01 AM
#1
Thread Starter
Registered User
Joined: Oct 2011
Posts: 574
Likes: 0
From: Washington State
Offroad Power Products Land Cruiser 200 Series
Check out the new Offroad Power Products 2013 Toyota Land Cruiser 200 series. It will feature our Nitro Gear & Axle 4.30 Ring & Pinions, TJM USA Rear Pro Locker, ICON Vehicle Dynamics Billet rear Lower control arms, ICON 2.5" remote res Coilovers & Piggybacks with compression adjusters, and ARB USA/Old Man Emu rear progressive coils.
We started off with a brand new 2013 Land Cruiser 200 series:
Some parts from ICON Vehicle Dynamics, check out the skids on the LCAs:
Tight quarters in the shop but we make it work:
Some of the rear ICON parts installed:
Installing some Nitro Gear & Axle 4.30 gears. This will put the truck close to stock gearing with the 33-34" tires. We also added TJM USA Pro Locker in the rear:
Getting started on the front end:
More to come!
We started off with a brand new 2013 Land Cruiser 200 series:
Some parts from ICON Vehicle Dynamics, check out the skids on the LCAs:
Tight quarters in the shop but we make it work:
Some of the rear ICON parts installed:
Installing some Nitro Gear & Axle 4.30 gears. This will put the truck close to stock gearing with the 33-34" tires. We also added TJM USA Pro Locker in the rear:
Getting started on the front end:
More to come!
Jul 29, 2013 | 09:45 AM
#2
Thread Starter
Registered User
Joined: Oct 2011
Posts: 574
Likes: 0
From: Washington State
Here are a few updated pics of it. After the lift, before new wheels and tires:
285/75R17 MTR's and some Hutchinson Rockmonster double beadlocks. No more calling it a Highlander now:
285/75R17 MTR's and some Hutchinson Rockmonster double beadlocks. No more calling it a Highlander now:
Thread
Thread Starter
Forum
Replies
Last Post
RedRunner_87
95.5-2004 Tacomas & 96-2002 4Runners (Build-Up Section)
84
Jun 1, 2021 01:51 PM
terminator
Misc Stuff (Vehicle Related)
3
Jul 27, 2015 07:13 PM
