AZ: 95.5+ Tacoma Aisin Manual Hubs PARTS
May 14, 2007 | 08:53 AM
#1
Thread Starter
Registered User
Joined: Mar 2006
Posts: 432
Likes: 0
AZ: 95.5+ Tacoma Aisin Manual Hubs PARTS
I bought a pair of silver dial Aisin hubs from a salvage yard in Vermont a few weeks ago. When I received them, I saw that the mounting flanged of the hub body was damaged from somebody not knowing how to remove them correctly.
That makes the hub as a whole unusable (though I'm sure your could grind the dents in the body flange down to make them work). However, all the internals are in PERFECT condition, from the dial, to the clutch and even all the gaskets (vehicle had 51K miles). I took one apart to confirm their completeness. They include all body bolts and both still have the needle ball for the dial detents. If you need some hubs for extra parts, here's a good way to get them cheap.
The yard doesn't even want me to send them back and they're just going to refund me the money back.
$40 SHIPPED
PayPal +3%
No pictures, as they're already boxed up. But if you understand you're basically getting damaged parts for salvage only, then you don't need any...
That makes the hub as a whole unusable (though I'm sure your could grind the dents in the body flange down to make them work). However, all the internals are in PERFECT condition, from the dial, to the clutch and even all the gaskets (vehicle had 51K miles). I took one apart to confirm their completeness. They include all body bolts and both still have the needle ball for the dial detents. If you need some hubs for extra parts, here's a good way to get them cheap.
The yard doesn't even want me to send them back and they're just going to refund me the money back.
$40 SHIPPED
PayPal +3%
No pictures, as they're already boxed up. But if you understand you're basically getting damaged parts for salvage only, then you don't need any...
Last edited by Midget96; Jun 24, 2007 at 09:03 PM.
May 16, 2007 | 01:40 PM
#2
Registered User
Joined: Mar 2004
Posts: 64
Likes: 0
aisin Hubs
PM sent-
I can use them-
I bought some used hubs a while back for spares-
The seller was having a shop perform a SAS adn the shop sent me the parts-
-They were pretty careless with the removal-
One set didn't even have the internal clutch-
The other one showed evidenc of Snap ring removal with needle nose or screw driver-
I figure with these hubs- I'll be able to put pack atleast 1 good unit.
I can use them-
I bought some used hubs a while back for spares-
The seller was having a shop perform a SAS adn the shop sent me the parts-
-They were pretty careless with the removal-
One set didn't even have the internal clutch-
The other one showed evidenc of Snap ring removal with needle nose or screw driver-
I figure with these hubs- I'll be able to put pack atleast 1 good unit.
May 22, 2007 | 12:21 AM
#3
Thread Starter
Registered User
Joined: Mar 2006
Posts: 432
Likes: 0
up.....
Jun 24, 2007 | 09:02 PM
#4
Thread Starter
Registered User
Joined: Mar 2006
Posts: 432
Likes: 0
Added a price...
Jun 25, 2007 | 09:34 AM
#5
Registered User
Joined: Mar 2004
Posts: 64
Likes: 0
I bought a pair of silver dial Aisin hubs from a salvage yard in Vermont a few weeks ago. When I received them, I saw that the mounting flanged of the hub body was damaged from somebody not knowing how to remove them correctly.
That makes the hub as a whole unusable (though I'm sure your could grind the dents in the body flange down to make them work). However, all the internals are in PERFECT condition, from the dial, to the clutch and even all the gaskets (vehicle had 51K miles). I took one apart to confirm their completeness. They include all body bolts and both still have the needle ball for the dial detents. If you need some hubs for extra parts, here's a good way to get them cheap.
The yard doesn't even want me to send them back and they're just going to refund me the money back.
$40 SHIPPED
PayPal +3%
No pictures, as they're already boxed up. But if you understand you're basically getting damaged parts for salvage only, then you don't need any...
That makes the hub as a whole unusable (though I'm sure your could grind the dents in the body flange down to make them work). However, all the internals are in PERFECT condition, from the dial, to the clutch and even all the gaskets (vehicle had 51K miles). I took one apart to confirm their completeness. They include all body bolts and both still have the needle ball for the dial detents. If you need some hubs for extra parts, here's a good way to get them cheap.
The yard doesn't even want me to send them back and they're just going to refund me the money back.
$40 SHIPPED
PayPal +3%
No pictures, as they're already boxed up. But if you understand you're basically getting damaged parts for salvage only, then you don't need any...
Let me know what email address & I will send paypal
$41.20
Thread
Thread Starter
Forum
Replies
Last Post
