I have both a 91 v6 and 88 v6 trucks that i am parting , no 91 body parts. Some of the parts that are available are the trans. radiators, shrouds, 5speeds, tcases, speedo clusters, wiring harness , ect 88 doors in fair shape, good 88 cab, IFS front ends, 4:10 and 4:56 ect. pricing depends on how much is purchased. but for starter the 4:10 IFS third $20, 4:56 $75 91 speedo $30.

ask for the parts you need. I am in southern California and can and will ship most parts that are under 50lbs on you dime.

 

how much for a V6 fan shroud from the 91? Shipped to 23831.

 

how much for a CV shipped to 83634, both sides are the same right?

 

Va_yotaman Shipping for the shroud looks to be about $25 UPS ground and i would like $35 for the shroud.

AH64ID both axles look the same on the 91 ( the 88 are still on the truck)
Shipping for the pair of Axles looks to be about $30 UPS ground and i would like $20 each for the Axles. the axles have about 40k on them but one of the outer boots has a tear, I have not looked at the 88 axles to see what the boots look like.

 

Would that be $35 for one CV, I am just looking for a spare... i will probally jinx myself but 1 is all I need, I would prefer the one w/out the tear :-)

 

Do you still have the power steering box for the 91? If so how much and how much to ship to 32608?

 

i need a passenger seat release cable and handle set up.

 

have a V6 4.10 or 4 cyl 4.56 third by any chance?

also, how much for the complete cab? and how good of shape is it in?

 

im looking for manual (IFS) hubs and a non ADD front end. (axle houseing and shaft) you could toss the other CV in if AH64 doesnt take both...

 

the PS box on the 91 is for me and the 88 sold for $60.

no seat release and the trucks are P/u not 4 runners

 

I have a 4cyl 4:10 third, i will check on the V6 third to see what ratio it is,

I have the non add third with 4:10 and IFS hubs, $100 for both huba the third and the axle that has the torn boot, ship on your dime but i will be in SLO on saturday night, add $10 delivery fee.

 

AH64ID sorry i thought that I replied to you, yes $35 for the axle is fine.

also in the previous post "huba" should read "hubs"

 

if that rear V6 third is 4.10 and you're going to be in SLO sat. night i can have cash in hand. let me know.

 

Snap-on

sorry i thought you were in SLO california not Mo. can ship though, my zip is 91359, just let me know.

l4runnerkid the V6 rear is still in the truck and i do not think i will have it out for the trip to SLO, but i do get up there often, i will see if i can check it on thursady so we will know the ratio.

 

pm'd you.

 

okay, sounds good. thanks. oh, for the axle codes inside the door... a 4.10 V6 third has the code G084, and a 4.11 V6 third has the code G294. might make it easier for you... thanks again.

 

the vin axel code is g292, so i think it is a 4:10 with 2 pinions. Also it has the 150F trans.

 

oh its a 4 cyl third? crap... my locker won't work in it. hmm...

 

It is a V6 truck.

 

that's weird. i thought all V6 thirds were 4 pinion... can anybody offer any insight on this?

any way you could take a pic?