Hello all!
After my 3vze broke down again, I decided to swap it with a 3.4. However, in Europe they are quite rare and I found one out of 1998 Land Cruiser 90 (VZJ90). Now, the real struggle is to find the factory service manual for it, which includes the electrical diagrams. Can someone here help?

I dont know how much the engine differs from the Land Cruiser to the 3rd Gen 4Runner, or Tachoma, T100 with the 5vz-fe engine. If they are the same it will be great, but I am doubt it.

Any help will be greatly appreciated!

 

I am currently in the process of trying to buy a 90 series Land Cruiser Prado. I have come to a bit of a cross roads on whether to head down the diesel route or the petrol route. My country (NZ) has pretty high taxes on diesel and also additional road user charges for mileage driving a diesel.

192.168.100.1 192.168.1.1

 

Yep! There you go, wiring manul for 90 series prado:
https://drive.google.com/file/d/1sFA...ew?usp=sharing
The 5VZ-FE from VZJ95 is 100% the same as the 3rd gen 4Runner from the same year. Same mounts, same bellhousing, same intake manifold
Also same changes throughout the years, so e.g. drive by cable until 1998, and then drive by wire.
As for the ECU - not sure, it IS possible that they do differ from eachother, cannot say for sure.

 

Thanks, man! I am currently rebuilding it, because it was very crusty. Glad that I did send the heads and block to the shop. Now I am putting it back together and hopefully will start on the wiring pretty soon.