clutch bleeding problems
Jul 2, 2005 | 10:42 AM
#1
Thread Starter
Registered User
Joined: Sep 2004
Posts: 146
Likes: 0
From: Ashland, Ohio
clutch bleeding problems
I just put a new clutch master cylinder and slave cylinder on my 88 yota truck, 3.0L, 5 speed, 4x4. Me and my mechanic bled everything and it was fine going home. But this morning I got in it to move it and the pedal was to the floor. Any ideas?? Pressure plate and throwout bearing are only 10K miles old. Any help is much appreciated. Thanks.
Jeff
Jeff
Jul 2, 2005 | 12:19 PM
#2
Contributing Member
Joined: Nov 2003
Posts: 1,571
Likes: 1
From: wilmington nc
sounds like you didnt get all of the air out of it and overnight it formed one big bubble in the line. Bleed it some more. 
Jul 2, 2005 | 05:22 PM
#3
Registered User
Joined: Nov 2004
Posts: 150
Likes: 0
From: Toms River, NJ
a good old gravity bleed should help things out..
Jul 4, 2005 | 02:19 PM
#4
Thread Starter
Registered User
Joined: Sep 2004
Posts: 146
Likes: 0
From: Ashland, Ohio
sweet, got it fixed. Went to Autozone and bought a vacuum pump and got it bled TIGHT. Thanks for the replies.
Thread
Thread Starter
Forum
Replies
Last Post
the1998sr5
95.5-2004 Tacomas & 96-2002 4Runners
15
Jul 14, 2020 08:35 PM
the1998sr5
95.5-2004 Tacomas & 96-2002 4Runners
6
Jul 16, 2015 06:20 AM
