Newbie Tech Section Often asked technical questions can be asked here
Sponsored by:
Sponsored by: CARiD

New owner of an '85 with some questions

Thread Tools
 
Search this Thread
 
Old Jul 2, 2011 | 07:44 PM
  #1  
boostlover07's Avatar
Thread Starter
Registered User
 
Joined: Apr 2011
Posts: 8
Likes: 0
New owner of an '85 with some questions

Hello everyone sorry to forum crash but I'm new to the site and love it so far but I have a few questions about a 85 4x4 22r and I have searched and cant find exactly what I am looking for so any help would be much appreciated fellas ok here goes I recently got an 85 solid axle rolling chassis and dropped a 85 22r 2wd engine into it, the truck originally had a 22r in it I believe and the guy I bought the engine from left every sensor and acc. on it and just cut the wiring harness on the chassis side when I dropped it in everything went in nicely and I plugged in the majority of the connectors and vacuum line but I did away with all of the emission canisters a vacuum line so my question is..... is there any major differences between an 85 2wd and 85 4x4 as far as engine electrical and vacuum? like I said I took off all the emissions canisters and stuff but exatly what major vacuum lines to I need at minimun to make it run? also are the any major electrical differences I should be aware of before I throw a battery in it and try and fire it up? also pics of vacuum routing and electrical in the engine bay would be very helpful when I did all the routing I had my friend with the same truck come over and park beside it and went off of that so I should be pretty close sorry for the long post guy and thanks so much in advance for the help Im trying to be a true fellow yota 4x4er lol thanks again
Reply
Old Jul 2, 2011 | 09:04 PM
  #2  
ChefYota4x4's Avatar
Registered User
iTrader: (5)
 
Joined: Jun 2009
Posts: 19,281
Likes: 20
From: Lake Havasu, AZ
I sense a beating coming on......

HEHE, jk, .... I think your best bet would be to start a thread, Boost... I don't mean to razz ya really, lol. I'm SURE you'd get plenty of help, .....but highjacking will always get you torn to pieces...Ok, not always, but often? lol.

Jesse might have some pics of his engine bay for ya, .....but again, it would be best if you start a thread and then ask him to post em there. I'm not much help with the 22r where you're needing it.

PS> Admire your attacking the project you are

Last edited by ChefYota4x4; Jul 2, 2011 at 09:06 PM.
Reply
Old Jul 2, 2011 | 10:19 PM
  #3  
dropzone's Avatar
Fossilized
iTrader: (6)
 
Joined: Oct 2005
Posts: 19,771
Likes: 456
From: PNW
Created a new thread for you
Reply
Old Jul 3, 2011 | 05:51 AM
  #4  
waskillywabbit's Avatar
Banned
iTrader: (-1)
 
Joined: Jul 2003
Posts: 3
Likes: 20
www.ncttora.com/fsm

Has both 2WD and 4WD stuff in the FSM.

:wabbit2:
Reply
Old Jul 3, 2011 | 06:06 AM
  #5  
87hillbillyoter's Avatar
Registered User
 
Joined: Feb 2010
Posts: 1,934
Likes: 0
From: N. Lake Tahoe/Chico CA
hey man, i cant even read what you wrote. periods every once in a while help...
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
mdev126
84-85 Trucks & 4Runners
9
Oct 4, 2015 04:48 AM
shisha1999
84-85 Trucks & 4Runners
12
Sep 21, 2015 08:22 PM
stock87yota
86-95 Trucks & 4Runners
16
Jul 31, 2015 10:08 AM
rushw
General Electrical & Lighting Related Topics
4
Jul 18, 2015 01:46 PM
icentropy
86-95 Trucks & 4Runners
1
Jul 13, 2015 10:57 AM




All times are GMT -8. The time now is 02:58 PM.