Ok first off I'm new to toyotas just bought an 86 the guy Jerry rigged a lot it has a 94 transmission in it 1) is this even a appropriate match obviously they will bolt up but the shifter is really sloppy feeling trying to find the gears is this due to the year difference or the bushing and shifter seat I've heard of so much about? I've undone the plate in the floor board with six screws and the four on the Lil plate holding the shifter in the tranny but can't get the shifter out of the plate it feels spring Locked and I have no idea were the bushing is located I found the little seat on the shifter ball it's in good shape. The guy I bought it from said to just put two o-rings to tighten it up but not were to put them. Sorry so long but please help

 

put in neutral and try and see if the shifter will come out. I dont no about the o rings

 

Got it fixed now I'm stuck with an oil leak

 

oil leak from pulling the shifter out?

 

No oil leak coming from the timing cover area