Newbie Tech Section Often asked technical questions can be asked here
Sponsored by:
Sponsored by: CARiD

Body lift r&r to stock

Thread Tools
 
Search this Thread
 
Old May 29, 2013 | 01:52 AM
  #1  
YotaSnap's Avatar
Thread Starter
Registered User
 
Joined: May 2013
Posts: 137
Likes: 0
From: NW WA
Body lift r&r to stock

The situation here is my 2 inch body lift.

1987 4Runner Limited Edition

Riding 31's 10.50.

I've read a few forums and have come to the conclusion that the 31's will be fine after the body lift is resolved, so thanks to those people.

What I am concerned about though is what needs to be returned to stock other than the bushings?

I do not have to mess around with transmission or transfer case shifter because the previous owner never fixed that problem. As you probably know, this means I have the "automatic heater" in the middle of the floor.

Suspension is stock as well.

Thanks for any possible help and I am sorry if I missed this somewhere.

Last edited by YotaSnap; May 29, 2013 at 09:47 PM.
Reply
Old May 29, 2013 | 02:08 PM
  #2  
YotaSnap's Avatar
Thread Starter
Registered User
 
Joined: May 2013
Posts: 137
Likes: 0
From: NW WA
My tires are 31 10.50 15

Before I order, I need to know if I just need the stock body mount bushings or if there is something more.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Flying91
86-95 Trucks & 4Runners (Build-Up Section)
45
Apr 11, 2024 04:39 PM
RedRunner_87
95.5-2004 Tacomas & 96-2002 4Runners (Build-Up Section)
84
Jun 1, 2021 01:51 PM
GreatLakesGuy
The Classifieds GraveYard
8
Sep 4, 2015 09:27 AM
coffey50
Offroad Tech
17
Jul 28, 2015 10:55 AM
Backcountry411
86-95 Trucks & 4Runners (Build-Up Section)
4
Jul 24, 2015 08:06 AM




All times are GMT -8. The time now is 02:33 PM.