tell me what you think
Mar 19, 2007 | 09:23 PM
#1
Thread Starter
Contributing Member
Joined: Oct 2006
Posts: 207
Likes: 0
From: Buckeye,AZ
tell me what you think
I just decided to sit down and figure out how to post pics so here you go. Tell me what you think of my work. I made the intake tube from 2 1/2" exhaust pipe from the parts store. The filter and adapter is actually for a
3.slow. Mine took a crap on me and I had this laying around and what do you know it fits. I bought some wire looms and made a mount for them to hold my wires off the header. Know I admit the LC engineering loom looks better but mine ony cost $2 not $34. I painted my valve cover while I replaced the front of the motor. I ordered the kit from ebay that included a water pump, oil pump, timing cover, chain and metal guides, and all the gaskets.
The rear panels are 1/4" plexi glass cover with carpet from the parts store. The lights in them I got from work.
The axle is sitting in my garage waiting to be put in. I have almost everthing to do the job. I still need tires, 1 set of gears, 1 14" travel shock.
3.slow. Mine took a crap on me and I had this laying around and what do you know it fits. I bought some wire looms and made a mount for them to hold my wires off the header. Know I admit the LC engineering loom looks better but mine ony cost $2 not $34. I painted my valve cover while I replaced the front of the motor. I ordered the kit from ebay that included a water pump, oil pump, timing cover, chain and metal guides, and all the gaskets.
The rear panels are 1/4" plexi glass cover with carpet from the parts store. The lights in them I got from work.
The axle is sitting in my garage waiting to be put in. I have almost everthing to do the job. I still need tires, 1 set of gears, 1 14" travel shock.
