locking hubs question

Reply Subscribe

Thread Tools

Search this Thread

Sep 9, 2008 | 04:16 PM

tman12345

Thread Starter

Registered User

Joined: Feb 2008

Posts: 212

Likes: 0

From: Western, MA

locking hubs question

If i switch from ADD hubs to manual locking hubs can i just use the screws holding on the ADD ones to put on the locking ones?

Sep 9, 2008 | 04:34 PM

waskillywabbit

Banned

iTrader: (-1)

Joined: Jul 2003

Posts: 3

Likes: 20

Yes. Those would be called "studs" and the manual hubs would be held on by a cone washer (split dowel), washer and nut.

Sep 9, 2008 | 04:34 PM

a4runnerfreak

Registered User

Joined: Jul 2008

Posts: 4,592

Likes: 0

From: Grew up in S.C.V, So Cal.....now in Hampstead, NC

I'm going to be doing this mod soon myself, (as soon as my hubs arrive), and after looking at the FSM, and talking to some who have done this, yes. You won't need any additional hardware

Sep 9, 2008 | 04:41 PM

tman12345

Thread Starter

Registered User

Joined: Feb 2008

Posts: 212

Likes: 0

From: Western, MA

but my hubs did not come with the cone washers and nuts? are those on the ADD ones and can I use those or will i have to buy them, if so anyone know the specs of the hardware?

Sep 9, 2008 | 04:46 PM

waskillywabbit

Banned

iTrader: (-1)

Joined: Jul 2003

Posts: 3

Likes: 20

The studs are already on the wheel hub with the ADD flange you have to remove and the cone washers, washers and nuts are what is holding those on already.