Webilt's 01' Limited Runner Sas'ed on 35s
#1
Registered User
Thread Starter
iTrader: (1)
Join Date: Nov 2002
Location: Weimar, Ca.
Posts: 158
Likes: 0
Received 0 Likes
on
0 Posts
Webilt's 01' Limited Runner Sas'ed on 35s
here is a few pictures of my 2001 Limited 4Runner,
it has the 3.4/auto and a swapped in manual (part time transfer case out of a 1997 4Runner)
it has a Tacoma 8.4 truck rear axle with 4.88s (open diff at this time), front is a Dana high pinion 44 narrowed to 62"s, ARB,4.88s and Warn axles with CTM u-joints, front springs are Rancho 44044s with Rancho 9000 shocks
the rear springs are Chevy 63"s 5-leaf with our custom double swing shackles and Rancho 9000 shocks
35"MTRs on 10" MT wheels, soon to be installed Staun internal bead locks,
also waiting in my shop is a nice new Warn 9500TI winch,
I have added an AEM dry-flo air filter, auto trans cooler, Magna-Flo exhaust, and currently adding a York 210 On Board air compressor,
I cannot take credit for the actual Sas on this Runner as I bought it from the previous owner who had Yota Man in Santa Rosa California do the SAS,, he did a killer job,
the previous owner could not get the speedometer to work which caused a check engine light,, and when it came time to smog, it failed,,, he gave up on trying to fix it,, thats where I came in,, the fix was very easy,, and it is now California licensed and smogged,!!
still to come are the sliders,and front rear bumpers,
here are a few pictures as of 8/19/08:
and a link to my partial build,,
http://webilt.com/forum3/viewtopic.p...73acdfe3f9b00b
it has the 3.4/auto and a swapped in manual (part time transfer case out of a 1997 4Runner)
it has a Tacoma 8.4 truck rear axle with 4.88s (open diff at this time), front is a Dana high pinion 44 narrowed to 62"s, ARB,4.88s and Warn axles with CTM u-joints, front springs are Rancho 44044s with Rancho 9000 shocks
the rear springs are Chevy 63"s 5-leaf with our custom double swing shackles and Rancho 9000 shocks
35"MTRs on 10" MT wheels, soon to be installed Staun internal bead locks,
also waiting in my shop is a nice new Warn 9500TI winch,
I have added an AEM dry-flo air filter, auto trans cooler, Magna-Flo exhaust, and currently adding a York 210 On Board air compressor,
I cannot take credit for the actual Sas on this Runner as I bought it from the previous owner who had Yota Man in Santa Rosa California do the SAS,, he did a killer job,
the previous owner could not get the speedometer to work which caused a check engine light,, and when it came time to smog, it failed,,, he gave up on trying to fix it,, thats where I came in,, the fix was very easy,, and it is now California licensed and smogged,!!
still to come are the sliders,and front rear bumpers,
here are a few pictures as of 8/19/08:
and a link to my partial build,,
http://webilt.com/forum3/viewtopic.p...73acdfe3f9b00b
Last edited by webilt; 08-19-2008 at 06:44 PM.
Thread
Thread Starter
Forum
Replies
Last Post
RedRunner_87
95.5-2004 Tacomas & 96-2002 4Runners (Build-Up Section)
84
06-01-2021 01:51 PM
Suprarossa
99+ Tundra, 00+ Sequoia, 98+ Land Cruiser/LX470
0
07-06-2015 05:21 AM