bigwaterbird

The cover on the rear diff is rusted out and leaking. I would JB Weld the leak but the fill plug is rusted and I imagine the metal is so thin it would just rip out anyway. Anyone ever grind off the old cover and weld in a new one? If so, where does one find a cover that fits? Or am I destined to find a new axle housing?

waskillywabbit

iTrader: (-1)

If one spot is that bad the rest is probably junk too. I'd just replace the whole axle housing.

:wabbit2:

bigwaterbird

OK--any ideas on where to find a used housing? I have looked all over online and can't seem to find the right one.

BamZipPow

Try www.car-part.com and see what's in yer area.

bigwaterbird

I searched Car-part, but no housings in the us for 4x4 w/abs. Are other housings the same (4x2, non ABS, etc?). If not, I guess I will need to find a whole assy...what gear ratio am I looking for in a stock '95 t100 (car-part has a few options). For now I stopped the leak with a very short self-tapper and some jb weld, but I want a permanent solution. Thanks for the help.

mightymouse

iTrader: (6)

where are you located?

bigwaterbird

Maine

t-1hundred

http://www.diamondaxle.com/rear_nonsteering.htm

a lil on the expensive side but if you plan on keeping this t this axle housing wont let ya down

BamZipPow

On the 4WD non-ABS rear axle housing...you just need to swap over yer sensors and the axles...and probably yer third member if it's in good condition.

This is what I found in Maine...

Year
Part
Model Description Miles Part
Grade Stock# US
Price Dealer Info
1997
Rear Axle
Toyota T100 6 Cyl, 4X4, w/o ABS; 4.30 ratio-OFF 060062 $625 Bill's Auto Salvage USA-ME(Fairfield) E-mail 1-888-844-2143
1996
Rear Axle
Toyota T100 CK RATIO W BRAKES OFFIN,2DR,AOD,3.4 8E2301 $600 Sun Auto & Salvage USA-ME(Norridgewock) E-mail 1-207-474-5176/1-800-843-5176
1998
Rear Axle
Toyota T100 OFFIN W BRAKES CK RATIO 3.4L 8G2378 $550 Sun Auto & Salvage USA-ME(Norridgewock) E-mail 1-207-474-5176/1-800-843-5176