Cylinder Heads International?
#1
Cylinder Heads International?
Does anybody have any experience with Cylinder Heads International? I'm considering buying a cylinder head from them off Ebay. They say their parts have a 12 month warranty....but if something fails and I have to spend $$ to have the part swapped out, then the warranty won't be worth much.
Any opinions, or recommendations of alternatives? I'm near San Jose, CA, something local would be a plus.
Thanks.
http://www.headsonly.com/
Any opinions, or recommendations of alternatives? I'm near San Jose, CA, something local would be a plus.
Thanks.
http://www.headsonly.com/
#2
Registered User
Join Date: Jun 2006
Location: Corvallis Oregon OSU
Posts: 462
Likes: 0
Received 0 Likes
on
0 Posts
strongly recomend spending a little extra and getting something that has been proven quality:
http://www.engnbldr.com/head_shop.htm
Many people will tell you that this is the only way to go!
http://www.engnbldr.com/head_shop.htm
Many people will tell you that this is the only way to go!
#4
Registered User
Labor Day weekend I installed 2 of their heads on a 3VZE 1995 'runner, along with Flamethrower injectors, new FP damper and regulator, plugs, cap, rotor, etc.
310,000 miles on this beast and she is running like practically new. Had a little CEL battle (71 - EGR) turned out to be the vac switching valve, bypassed it and no more CEL, just have to warm it up a couple minutes or it drives like crap.
Didn't see 3VZ heads on engnbldr, I did buy gaskets and head bolts from Ted. Thirds on them for sure, Ted gave me good parts and good advice
I'll vouch for CHI, a smooth transaction and a good product, I want to see if I can get 500K out of this old 'Runner!
310,000 miles on this beast and she is running like practically new. Had a little CEL battle (71 - EGR) turned out to be the vac switching valve, bypassed it and no more CEL, just have to warm it up a couple minutes or it drives like crap.
Didn't see 3VZ heads on engnbldr, I did buy gaskets and head bolts from Ted. Thirds on them for sure, Ted gave me good parts and good advice
I'll vouch for CHI, a smooth transaction and a good product, I want to see if I can get 500K out of this old 'Runner!
Thread
Thread Starter
Forum
Replies
Last Post
kgcwb44
86-95 Trucks & 4Runners (Build-Up Section)
4
01-29-2023 10:02 AM
Iceman4193
86-95 Trucks & 4Runners
28
08-28-2015 08:43 PM
cylinder, dealt, ebay, experience, forums, good, head, heads, headsonly, headsonlycom, int, internation, international, opinions, oregon, toyota