theswede

Hello there

Im a newbie here and couldn't find this on the blogs/threads, so please forgive me if I missed a link or thread..

But I just got my hand on a 1995 Toyota Pickup w a 22RE, that was "de headed" already and all wiring disconnected..

I put a new head in here, with ARP studs, new chain drive and so forth..

Now I standing and staring at the wiring harness, what connectors goes to what injector? and the other connectors on the intake side?

Anyone that has any pictures of this? I am terrible to read schematics I tried to find pics here or other place online, i I did not really find "my" rig

I add some info below

Again, its a 1994 Toyota Pickup with 22 R-E
(engine family RTY2.417G1GA)(EVAP FAMILY RTY1047DYMOO)
3D650 22R-E TRUCK 2WD CAL
VINJT4RN81AXR5182286
VIN

theswede

Some pictures from the pickup with the "new" head..

theswede

Or if someone have any kind of pictures of the routing of the wiring harness in the engine room? :/

atcfixer

iTrader: (1)

I looked though my pics and didn't see any good ones to show wiring on the RE. Pretty sure the wire comes from the front of the engine down to the back. Injector plugs would be in order as the wire lays out.

This is the layout for the 1990 pickup 22RE, don't have 95 yet, but should be very similar. Good luck!


https://gyazo.com/1f2ca5b647219f901d65aa82907db513


https://gyazo.com/45d0564578f5cfa335b14954f8902861

space-junk

iTrader: (1)

check my build thread. was having same issues. many folks helped there.