noisy whirrly clutch sounds
12-23-2008, 05:26 PM
#22
Registered User
Thread Starter
Well Gents I am happy to report good news
After following the real manual
Cylinder 1 = 165
Cylinder 2 = 165
Cylinder 3 = 170
Cylinder 4 = 170
Keep in mind there is an extra thick head gasket on. I might have been able to eeek out the last 5 psi on 1 and 2 if I turned over the engine a couple more times. Overall I am happy. I set the TPS and she prrrs. Oh and I added an external tach. It sits on the vent grill just below the windshield. Very handy.
After following the real manual
Cylinder 1 = 165
Cylinder 2 = 165
Cylinder 3 = 170
Cylinder 4 = 170
Keep in mind there is an extra thick head gasket on. I might have been able to eeek out the last 5 psi on 1 and 2 if I turned over the engine a couple more times. Overall I am happy. I set the TPS and she prrrs. Oh and I added an external tach. It sits on the vent grill just below the windshield. Very handy.
Thread
Thread Starter
Forum
Replies
Last Post
he's gone
95.5-2004 Tacomas & 96-2002 4Runners
7
12-03-2019 07:08 AM
