8" Differential Gear Mesh
04-11-2013, 02:52 PM
#1
Registered User
Thread Starter
Join Date: May 2011
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
8" Differential Gear Mesh
i dont generally post questions like this (especially on here. im mainly on pirate and rarely come here), i just need to get this answered so i can install this differential soon in a friends truck.
ive set up a few toyota diffs before and am having a tough time with this one.
using a solid spacer with .035'' shims set to .005-.006 backlash.
i generally use my yukon gear book for reference on the different gear meshes but this particular one isnt showing up.
so my question is, do you guys think this gear mesh is within tolerances?
ive set up a few toyota diffs before and am having a tough time with this one.
using a solid spacer with .035'' shims set to .005-.006 backlash.
i generally use my yukon gear book for reference on the different gear meshes but this particular one isnt showing up.
so my question is, do you guys think this gear mesh is within tolerances?
Last edited by sheedy126; 04-11-2013 at 03:31 PM.
04-11-2013, 04:15 PM
#3
Registered User
Join Date: Jun 2009
Location: Madison, WI
Posts: 282
Likes: 0
Received 0 Likes
on
0 Posts
a lot of good info is here
http://gearinstalls.com/gearpatterns1.htm
main page
http://gearinstalls.com/jake1.htm
1998 4runner gear install write up
http://gearinstalls.com/jake1.htm
http://gearinstalls.com/gearpatterns1.htm
main page
http://gearinstalls.com/jake1.htm
1998 4runner gear install write up
http://gearinstalls.com/jake1.htm
Last edited by badattitude; 04-11-2013 at 04:16 PM.
04-11-2013, 04:33 PM
#4
Registered User
Thread Starter
Join Date: May 2011
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
a lot of good info is here
http://gearinstalls.com/gearpatterns1.htm
main page
http://gearinstalls.com/jake1.htm
1998 4runner gear install write up
http://gearinstalls.com/jake1.htm
http://gearinstalls.com/gearpatterns1.htm
main page
http://gearinstalls.com/jake1.htm
1998 4runner gear install write up
http://gearinstalls.com/jake1.htm
i think i need to add quite a bit more than .035" shims to get a good pattern
Thread
Thread Starter
Forum
Replies
Last Post
justdifferentials
Just Differentials
1
09-17-2015 06:14 PM
justdifferentials
Just Differentials
1
08-15-2015 05:25 PM
Athansinis
Hot Deals - Free Stuff - Craigslist
0
07-27-2015 08:38 AM
justdifferentials
Just Differentials
0
07-22-2015 08:26 PM
