Yup, that's what mine did. Sometimes what I do is just set the pedal with my foot and then click on the hand throttle to hold.

No, no I get a range of clicks!!! It's just I want at the first click I get an increase of rpm and then another click a little more...etc. Before it would take three clicks before a responce and then VROOOOOOM! lolz

No worries man! I got a chance to try it out and it does flex a weeeeee little but I can actually get about one or two clicks and get throttle up. I think I'm just over critical on its function, lol!

Hey man, I finally had a chance to make a brace for that fairing the mounts screws into. WOW, much better and is solid. I just used some 22 guage steel and used a cardstock template. It attaches by the four screws you provide with the mount and then I used my efan switch to mount the other side. I'd recommend providing that in the kit OR in the instructions recommend bracing if the panel (due to age?) flexes too much. Just a thought!

The two studs you removed, did you reuse those in the the new drilled/tapped holes?

Thanks man!! I've collected some links and what not. Right now, looks like I'm getting the whole diff plus harness and hopefully the control box. If I can't get the box, I guess I'll either buy one or make it. I also have to swap the gears out and will hopefully be able to reuse mine...gotta get a rebuild kit too

Picked up an elocker, might be askin you questions if you don't mind?

Well, the hand throttle is working great! The only thing I noticed was that the plastic fairing that you mount the cable mount to, flexes...a lot. Sooo, I'm gonna brace it some how to perhaps get a little better responce out of the cable.

yeah yeah yeah...geez if there would have been PICTURES....

Ok, so I repositioned the bracket so that it's on the left side of the throttle bracket with the wire hold bolt towards the driver seat, make sense? So you can wrap the cable around that bolt. Works WAAAAAAAAAAAAAAAAAY better now! LOL!