your runner is badass, just about exactly what im looking to make mine look like, if you dont mind me asking, what kind of lift do you have on yours?

what kind of exhaust should i run on my pickup im to sure about sized pipe, and muffler and header. any ideas?

thank u for being such a HUGE help... u saved me days of problem solving

hey bud my canisters are in working order, they are not clogged... but i started my truck drove it around and it ran great for a few hours then outta the blue it got up to temp and started acting up again... ive drained my tank and have cleaned it twice in the past week im going crazy... my fuel pump is only a few months old egr valve seems fine as well, do you have anymore ideas... thank you and look forward to hearing from you... i also took out my thermostat so it shouldn't even get up to temp... my temp gauge gets about 3/4 of the way up when it starts to missfire, but doesn't over heat... i brought my truck to a garage paid them a hundo just for them to tell me that there was nothing wrong with it and to just keep driving it....

where can i find two canisters for the yota, both are of different sizes.... its an 85 body with an 83 22r for a motor.... stock, im having trouble finding these darn charcoal canisters... advanced, no... autozone , no... rock auto, no... ebay, useless... i really dont want to get one from the junk yard

Hello Myyota. I had a question about the MAF sensor you used in your 22RE. Was it from a Celica 5M-GE engine. I have a link to one but wanted to know if it's the same as the Supra # 2250-4310, thank you. Also, do you still have your 86' Runner? I have a completely bone stock except for a header from LC and full exhaust, new engine with about 8K, brand new 31s as of 3 days ago,and some other goodies, just wondering. Your rig is the ideal image of what I'd like to do to mine, simply beautiful my friend, I'm sorry about your leg conditions

Noticed that you have the Cressida AFM installed in your pickup. Looking to do the swap but the supra units are hard to find. Cressida units no problem. What year cressida did yours come from if you dont mind?

got a question for you hope you can answer it sounds like you may have delt with it before. but i need too replace my whole heater control assembly in the dash, what is the easyest way too remove it. i have a 86 4runner, im trying too pull the top part off on the pass side of the dash i got all the screws i could see but there is something holding it in place on the far back center. is there an easyer way too get this heater control out an get the new one in place with out braking it?