My 92 4 Runner had a bad valve on number 6, I fixed it. I changed knock sensor, and wire, cleaned all the exhaust from my EGR out of the intake, installed new injectors. Everything went well, I started the truck a half dozen times and it ran fine, even though I didn't put a timing lite on it yet.
I installed my hood and let it slam shut a couple of times to make sure it was latching right.
I started adding fluids to it and went to restart it and nothing. The head lights work the lites in the door come on the key light lites up but everything else seams to be dead .
I re- checked all connections, checked fuses noticed I had a blown 40 amp fuse, I changed ,blew it again. I've checked my alternator, starter other fuse boxes. I checked my fuse able link at the battery and juice flowed through this wire. I suck at electrical problems. I can't get my transmission to move out if park even with the brake depressed.
Help, what am I over looking?
Thanks.