Gamble_STi
April 16, 2015
Modified inner ring of the steering wheel. Basically, because my wheel is from an mr2, my ring that contacts for the horn was too far to the inside, so i had to expand it. First i removed any notches or pins with a dremel, i then filled all the holes and smoothed it with 2 part epoxy. After the epoxy cured, i used a conductive paint i had laying around meant to repair rear defrosters, to coat the entire surface and make a solid connection to the inner ring. because i knew the paint
More About This Picture
Vehicle
N/A
Location
N/A
Keywords
N/A
Discover More Pictures
See MoreAdvertisement
Be the first to comment on this picture!