TX4Roc meet at Barnwell?
#21
Yeah, I wished I was able to help pull the envoy out, but I never knew exactly what to hook up to what or how!!! I'm glad Blake found the straps that we left at the first place!!
#22
Registered User
Thread Starter
Join Date: May 2002
Location: Langley AFB, VA
Posts: 302
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 4route
that one with the huge valley didn't look too easy
The one with the valley was actually really easy, you just need a good spotter and then no problem. One of the great things about Barnwell is that there are bypasses around almost every obstacle, you can watch someone else go through, then decide if you want to try it, if not then just take the bypass, like in the pic below, notice where the guys' feet are, that would be the bypass.
#24
Registered User
Join Date: Feb 2004
Location: Fort Worth TX
Posts: 437
Likes: 0
Received 0 Likes
on
0 Posts
I may be able to make the 19th. I'll be installing a new third member with a locker. That project will start on the 15th. So if I can get it installed by then I'm up for it.
#25
Registered User
Thread Starter
Join Date: May 2002
Location: Langley AFB, VA
Posts: 302
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Designsbyme
I may be able to make the 19th. I'll be installing a new third member with a locker. That project will start on the 15th. So if I can get it installed by then I'm up for it.
Just the rear? OK, Slide out rear axles, remove driveshaft, remove third, install in reverse order = you have no excuse . It'll be a good opportunity to try it out. If not I'd be game to meet you there anytime I don't have plans, I'm only an hour away from there.
#26
Registered User
Join Date: Feb 2004
Location: Fort Worth TX
Posts: 437
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Wild_Bill
Just the rear? OK, Slide out rear axles, remove driveshaft, remove third, install in reverse order = you have no excuse . It'll be a good opportunity to try it out. If not I'd be game to meet you there anytime I don't have plans, I'm only an hour away from there.
#28
Registered User
Join Date: Jan 2004
Location: San Antonio, Texas
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
Hiya everyone! Those pics from Barnwell look great! I'm hoping that I'll be able to meet up with you guys (and gals) on the 19th (if that's the date). I wasn't able to make it for the first meet, but it looks like ya'll had a great time!
Is the 19th a set, for sure date? I need to request the time off from work ( )
Is the 19th a set, for sure date? I need to request the time off from work ( )
#29
Registered User
Thread Starter
Join Date: May 2002
Location: Langley AFB, VA
Posts: 302
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by gumbo
So june 19th is this set or what?
#30
Contributing Member
Join Date: Nov 2003
Location: Escondido, CA
Posts: 1,082
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Wild_Bill
I haven't heard anything negative about the 19th from anyone (unless designs takes 4 days to replace a third ), so let's call it a date. Let's make this a good one, we have more than a month to plan, so no backing out . We can all meet in Longview that morning and then convoy on up to Gilmer.
I know for a fact I can not take leave that weekend so, I will just have to hope it works out.
#34
Contributing Member
Join Date: Apr 2004
Location: Fort Worth, TX
Posts: 921
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 4route
I hope you guys/gals do too!
I graduated from LeTourneau University in Longview.
#35
:wtf: at one point evreyone seemed to have a blast yet someone was complaining. c'mmon everybody seemed to be encouraging here, why the heck people would feel like insulted? Think twice before contradicitng!! perhaps that's a matter of attention.... btw, everybody rocks!! wish i could have joined!!
#36
perhaps you came late and did not read that the part i took to be insulting was edited out of the original post.
bottom line is - sarcasm is hard to detect in text.
so .. who are you?
bottom line is - sarcasm is hard to detect in text.
so .. who are you?
#37
Registered User
Thread Starter
Join Date: May 2002
Location: Langley AFB, VA
Posts: 302
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by yotapete
at one point evreyone seemed to have a blast yet someone was complaining. c'mmon everybody seemed to be encouraging here, why the heck people would feel like insulted? Think twice before contradicitng!! perhaps that's a matter of attention.... btw, everybody rocks!! wish i could have joined!!
#39
Contributing Member
Join Date: Nov 2003
Location: Escondido, CA
Posts: 1,082
Likes: 0
Received 0 Likes
on
0 Posts
I love you all
I am getting excited...I just bought a skidplat from AZrain and I hope it will help out a bit. I will not have my lift by the 19th... I still can't wait to come out again
I am getting excited...I just bought a skidplat from AZrain and I hope it will help out a bit. I will not have my lift by the 19th... I still can't wait to come out again